Kanto TUK for sale in Montreal in Layton Audio
Kanto TUK for sale in Montreal in Layton Audio
Kanto TUK for sale in Montreal in Layton Audio
Kanto TUK for sale in Montreal in Layton Audio
Kanto TUK for sale in Montreal in Layton Audio
Kanto TUK for sale in Montreal in Layton Audio

Kanto TUK


$999.00 + $0.00 (Ecofees) Free shipping with order of $100.00 or more

The all new TUK amplified speakers by Kanto




Technical specifications

Delivering clarity and performance that put it in a class of its own, TUK is designed to push the limits on what a bookshelf speaker can achieve. Fine-tuned with onboard DSP, its high-performance AMT tweeters and 5.25” aluminum drivers produce sparkling highs and rich bass, bringing life to all your source material. Its active crossover further improves low-end resolution by filtering out sub-80Hz frequencies when connected to a subwoofer. Outfitted with dedicated phono, RCA and Optical TOSLINK inputs, a built-in USB DAC and headphone amp, and Bluetooth 4.2 with aptX HD and AAC codecs, TUK provides the flexibility you need to enjoy all your devices. 


Crystal clear sound at any volume.

Along with producing enough bass to challenge a standalone subwoofer, the high rigidity and low mass of TUK’s aluminum drivers allow them to operate at optimal efficiency while greatly reducing distortion. Experience a whole new level of depth and clarity, even at higher volumes.

Stereo imaging like no other.

TUK utilizes high-performance AMT tweeters that not only deliver brighter, more accurate highs, but offer a remarkable soundstage. Get lost in your favorite songs and soundtracks, regardless of where you are in the room.

DSP Controlled


TUK features integrated digital signal processing (DSP), designed to optimize audio quality and provide greater accuracy in sound reproduction.

Active Crossover


When enabled, TUK’s active crossover filters out frequencies below 80Hz and sends them directly to a connected subwoofer, further improving resolution.

Designed to fit in.

  • Reversable Channels
  • Custom EQ Presets
  • Advanced Signal Detection
  • Night Mode

Swap channels to accommodate your setup.


When cabling or the location of your power outlet requires the active speaker to be placed on the right, TUK makes it easy to maintain proper stereo imaging by giving you the ability to swap the left and right channels. No extension cord necessary.



Throw on your favorite record.



Enjoy high-definition streaming with aptX™ HD.



Achieve the ultimate desktop setup.



Bring your movies to life.

More control than ever.

The TUK remote gives you unparalleled control over your sound. Quickly switch between sources, set multiple EQ preferences, and control playback while connected via Bluetooth or USB.




Tweeters 28 x 35 mm Air Motion Transformer (AMT)

Woofers 5.25” Aluminum Concave Cone

Amplifier Type Class D

Analog Input Sensitivity 950 mV

Frequency Response 50 Hz - 20 kHz

High/Low Pass Filter 80 Hz (selectable)

Inputs Bluetooth® 4.2 aptX™ with

 Qualcomm® aptX™ HD and AAC codec

1 x USB

1 x Optical (TOSLINK)

1 x RCA

1 x RCA with Dedicated Phone Pre-amp

Outputs 1 x Subwoofer Out

1 x USB Charge 5V 2A

1 x 3.5 mm Headphone Out

Power Output 260W Peak Power

(130W Total RMS)

Max USB Bit Depth / Sample Rate 24-bit / 96 kHz

Auto Power Down Yes (Can be disabled for Always On operation)

Auto Power Up Yes (Can be disabled)

Input Voltage / Frequency AC 100V – 240V 50/60 Hz

(auto switching)

Standby Power Consumption < 0.5 W

Speaker Grille Included

Remote Included

Speaker Dimensions 7.0” W x 8.5” D x 10.9” H

(17.8 x 21.5 x 27.6 cm)

Active Speaker Weight 11.1 lb (5.0 kg)

Passive Speaker Weight 9.9 lb (4.5 kg)

Shipping box dimensions 20.6” x 12.3” x 14.2”

(52.2 x 31.2 x 36.1 cm)